When a large food or FMCG company buys a packing line, the purchase rarely starts with a phone call. It starts with a document. A plant head, a project engineer and a procurement manager agree what the machine must do, write it down, and send it to a short list of manufacturers. How clear that document is decides the quality of the quotations that come back, and later it decides how easy the acceptance test is. A vague request produces vague offers that cannot be compared. A sharp request produces offers that line up side by side and expose weak suppliers quickly.
This guide gives procurement and project teams a practical structure for a request for quotation (RFQ) and a user requirement specification (URS) for a vertical form fill seal (VFFS) or pouch packing machine. It is written from the manufacturer's side of the table, so it also shows which answers a serious supplier should be able to give without hesitation.
RFQ and URS: What Each Document Does
The two documents are related, but they do different jobs.
- URS (user requirement specification): describes what the line must achieve in your plant. It covers product, pack, output, accuracy, hygiene, utilities and documentation. It stays valid even if you change supplier.
- RFQ (request for quotation): the commercial package sent to suppliers. It attaches the URS and asks for price, delivery, payment terms, warranty and references in a fixed format.
Write the URS first. Teams that send an RFQ without a URS usually end up negotiating scope after the order, which is the most expensive time to do it.
Section 1: Product and Pack Definition
Start with the product, because it drives every other choice. Give the supplier real information, not a category name.
- Product name, form (powder, granules, snack, flakes, liquid or paste) and bulk density.
- Particle size, stickiness, oil content, moisture and whether the product is fragile or dusty.
- Pack styles needed: centre seal pillow pack, side gusset, flat bottom, D-cut or Euro slot.
- Pack weight range, for example 50 g to 1 kg for retail or 5 kg to 10 kg for bulk.
- Film structure, film width, core size, roll diameter and print registration needs.
- Barrier requirement, including whether nitrogen flushing is needed for shelf life.
A product sample sent in advance removes guesswork. Any supplier who will not run your product before quoting is asking you to accept risk on their behalf. If you pack powders such as spices, a sample test on a servo auger filler shows weight accuracy and dust behaviour in minutes.
Section 2: Output, Speed and Efficiency
State the output you need as a net figure, not a headline speed. Machines are sold at maximum speed, but plants run at a lower, steady speed once film changes, jams and cleaning are counted.
- Required packs per minute at your pack size, and the shift pattern (one, two or three shifts).
- Expected overall equipment effectiveness (OEE) target for the line.
- Whether you need continuous motion or intermittent motion.
- Room for future growth, such as a second lane or a faster model.
The motion type matters. An intermittent motion machine such as our Komet Sprint delivers up to 100 pouches per minute for pack weights from 10 g to 1 kg, and the Indus 5000 runs up to 40 bags per minute for 5 kg to 10 kg bulk packs. For very high output on centre seal pillow packs, a continuous motion machine such as the GT-5s, with five servos and capacity of up to 180 pouches per minute, is the usual choice for FMCG volumes. Matching the motion type to your pack mix is the first technical decision in the URS. Our guide on VFFS versus HFFS machines helps if you are also weighing a horizontal format.
Section 3: Dosing and Weight Accuracy
Giveaway, the extra product placed in each pack to avoid underweight, quietly drains margin at scale. A tighter filler pays for itself quickly on a high-volume line. Define the target in the URS.
- Declared pack weight and the allowed tolerance, based on the legal metrology rules that apply to you.
- Filler type: a servo auger filler for powders, a volumetric cup filler for free flowing granules, or a multihead weigher for snacks, nuts and irregular products.
- Acceptance method: how many packs will be weighed, and what percentage must fall inside tolerance.
Ask each supplier to state the accuracy they will guarantee on your product, and the test they will use to prove it. A guarantee tied to a test is worth more than a number printed in a brochure.
Section 4: Hygiene, Materials and Cleaning
Food and pharma buyers need machines that are easy to clean and built with suitable materials. Include these points in the URS.
- Stainless steel grade for all product contact parts, such as hopper, auger and forming tube.
- Smooth, crevice free surfaces and quick release parts for fast cleaning.
- Dust extraction or containment for powders.
- Time allowed for changeover and full cleaning between products or allergens.
- Food contact material declarations if your customers or auditors ask for them.
Changeover time is often overlooked. A line that takes three hours to clean loses a third of a shift every time the product changes, which hurts an operation with many SKUs far more than a small difference in top speed.
Section 5: Controls, Data and Safety
Large plants expect machines to behave like part of a managed system. Specify the control hardware and the data you need.
- PLC and motion controller brand, because your maintenance team may be trained on specific platforms.
- Servo drive brand and availability of spares in India.
- Touch screen language, recipe storage, user levels and alarm history.
- Counters, batch totals and data export for production reporting.
- Safety guards, interlocks and emergency stops, with the safety standard you follow.
- Optional peripherals: date coder, film splicing, metal detector and checkweigher interfaces.
Our own machines use named, widely supported components. For example, the Komet Sprint uses Delta or Siemens servo motors and a TRIO-UK motion controller, which means service engineers are not locked into an unfamiliar system.
Section 6: Utilities and Site Conditions
Tell the supplier what the machine will face. Include power supply and phase, compressed air pressure and quality, nitrogen availability, ambient temperature and humidity, floor loading and the clear space available. Missing information here causes surprises at installation, such as a machine that needs more air than the plant main can give.
Section 7: Documentation, Training and Support
The machine is only half of what you buy. The other half is the support that keeps it running for ten years or more. Ask each bidder to confirm the following in writing.
- Operation and maintenance manuals, electrical drawings and a recommended spare parts list.
- Installation, commissioning and operator training at your site.
- Warranty period and exactly what it covers.
- Response time for breakdown calls and the location of the service team.
- Availability of spare parts over the machine's life.
A manufacturer based near your plant can respond faster than an importer working through a distributor. Our factory is in Faridabad, close to many NCR food and FMCG sites, which shortens parts delivery and engineer visits.
Section 8: Acceptance Testing (FAT and SAT)
Agree the acceptance method before you place the order. Two tests are standard.
- Factory acceptance test (FAT): run at the supplier's works on your product and film. Agree the speed, duration, weight accuracy and seal quality targets in advance. Your engineers should be invited to witness it.
- Site acceptance test (SAT): repeated after installation in your plant, using your normal operators and film, to confirm the machine meets the URS in real conditions.
Tie a part of the payment to each test. A payment plan that releases the final instalment only after SAT keeps both sides focused on the result.
How to Score the Quotations
When quotations arrive, compare them on one sheet. A simple weighted score removes the temptation to choose on price alone.
| Criterion | Suggested weight | What to check |
|---|---|---|
| Technical fit to URS | 30% | Output, accuracy, pack styles, filler choice |
| Trial results on your product | 20% | Weight accuracy, seal quality, speed achieved |
| Total cost of ownership | 20% | Price, spares, power, film use, expected life |
| Service and spares | 15% | Response time, local stock, training |
| Delivery and project plan | 10% | Lead time, installation plan, FAT date |
| Commercial terms | 5% | Payment milestones, warranty, penalties |
Adjust the weights to your priorities, but fix them before you open any quotation. For the total cost view, see our guide to packaging machine ROI and payback. For a wider look at suppliers in the market, read Top 10 VFFS Machine Manufacturers in India and how to choose the right packaging machinery supplier.
Common RFQ Mistakes to Avoid
- Quoting maximum speed instead of net output on your pack.
- Leaving out the filler, even though it decides accuracy and a large part of the price.
- Accepting a quotation without a product trial.
- Skipping spares and service in the comparison.
- Sending the RFQ to too many suppliers. Three to five qualified bidders is enough, and it gives each one a reason to invest time in your project.
Send Your URS to VS Packit
VS International (VS Packit) manufactures VFFS and pouch packing machines in Faridabad for food, FMCG, snack, spice, flour and pharma producers. We respond to RFQs with a clear technical compliance sheet, a trial on your product, and a defined FAT plan. Share your URS, or even a rough list of product, pack and output, through our contact page, and our engineers will come back with a recommended model and a quotation. You can also read more about our company before you shortlist us.
